HO Scale Castings

  New HO Scale Stuff

   RRS-H-07 - Here is the latest HO offering. This small shack will fit just about anywhere.
   you can see it as a miners shack, hobo shack, oil field shack or part or a freedom village
   from the depression era. Molded a lot of detail into this casting. Check out the photos
   below. This is a one piece casting with a plastic piece for the smokestack. This casting
   will have a small footprint that measures 3 1/2" by 4" and 1 3/8 " tall.  All resin casting.

   Click on picture for pricing.

  
  
  

  Castings from previous newsletters

   RRS-H-06 - Here is our first HO building that is hollow. You assemble the sides
   put in the Tichy Train Group windows and doors. Just check out the wall detail
   patches and all. This unit has no base. I threw in some extra Rusty Rail castings
   to bring this building to life. Below you can see the walls and roof etc. The only
   parts that are not resin are the awning posts that are wood that is included with
   the building.  I will provide some paper signs to add to your walls. These buildings
   will have a small footprint that measures 3" by 2" and 2 5/8 " tall.  All resin casting.

   If you have any small buildings you would like to see created, submit the drawing
   or picture to me and if we create the building you get one free.

   Click on picture for pricing.
   
  
  
  
    
  

   RRS-H-05 - Here is a building that is about to go over. If you have ever been to
   an old town or ghost town you have seen one of these. Junk piles and and old
   model T surround this building. Just check out the wall detail patches and all.
   This is a two piece casting, Measures 4" by 4" and 2 1/2 " tall. All resin casting.

   Click on picture for pricing.

 
    

   RRJP-H-21 - This is a casting of an old auto junk yard # 1. I will make several of
   these so you can create a auto junk yard. Check out the 35 Ford the canvas roof
   is rotten away and the inside is gutted,  The casting  measures 6" by 2 3/4" and
   1" tall.  All resin unpainted casting.       
   
   Click on picture for pricing.

 
 
 

   RRLC-H-01 - This great little log car is ready for delivery. Larry Smith created the master and
   wrote the instructions. The car body and log load are all Rusty Rails provides. You need to
   provide trucks and couplers. The instructions  let you know the trucks and parts you will
   need.  The casting  measures 3" by 1 1/8" and 3/8" tall.  All resin unpainted casting.    

   Click here to view the instructions Log Car Instructions.  
      
   Click on picture for pricing.
  
    
  
    RRJP-H-20 - This is a casting of an old derelict shay engine. That would look
   great behind an engine house, logging railroad or mining railroad.  The casting
   measures 6 1/2" by 2 3/4" and 2" tall.  All resin unpainted casting.          
   Click on picture for pricing.

   RRMS-H-05 -Here is another great junk car that can be placed behind an old building.
   The auto has a wood bed. Lots of junk laying around. If you only want the car do like
   I do some times and cut the rest of the casting out.  The casting measure 3 1/2" by
   2 3/4" by 1". Click on picture for pricing.

  RRCL-H-01 - Here are some loads to put in you HO gondola or flat car. You get
  two loads. One load is 3 7/8" by 1" the other load is 3" by 7/8". You can also
  cut them up for junk piles.   Click on picture for pricing.

  RRMS-H-04 - We have all came upon a ruin of a old house or cabin with only the
  chimney standing and  some of the foundation. This mini scene can be dropped
  in to any place on your layout out in the boon docks. Some of the wood floor and
  junk are still laying around. The casting measure 4" by 3" by 2".
  Click on picture for pricing.

 
                                      

   RRK-H-03 - Here is a our latest HO kit, the single car garage w/interior. I can
   remember these garages when I was a kid full of old junk and cob webs. I
   added all the interior for you all you have to do is paint it and some minor
   assembly. The base has some great detail as you can see in the pictures
   below. All you need to to do is add your favorite car and you are good to go.
   The kit is designed to be a single car garage behind a house that lets out into
   the alley behind the house. You can see the trash cans in the alley. If that does
   not work for your knock down the fences and have a stand alone garage. A lot
   of different things you can do with this one. The car in pictures below is not included.
   Will make another home garage with peaked roof in the future. The base measures
   4" by 3 1/2". The kit does require some minor assembly and painting.
   Click on picture for pricing.

   RRWB-H-08 - Here is a new work bench that is like our last O scale work
   bench. The work bench comes with a parts bin. Just check out the great detail.
   You get the work bench and the parts bin. Figure not included. Click on picture
   for pricing.

            
 RRMS-H-03 - This casting is another junk car. The car is a 1927 Chevrolet
  sedan that has seen better days. The original cars were sold by Harry Brunk a
  few years ago. Harry has granted Rusty Rail the right to cast these cars and we
  cast the 2 door version in last months news letter, in a junk scene. So I hope
  you enjoy this one. Check out the fence this is molded into the casting. This is
  a one piece casting. That back fence is begging for some old posters. This car
  could be behind a house the trash cans in the alley. I will have some more junk
  cars coming soon.  Click on picture for pricing.

    
 

  RRJP-H-17 - This casting is another junk car. The car is a 1927 Chevrolet
  Cabriolet Sports Coupe that has seen better days. The original cars were sold
  by Harry Brunk a few years ago. Harry has granted Rusty Rail the right to cast
  this car and the 4 door version in a junk scene. So I hope you enjoy this one.
  I will have some more junk cars coming soon. Click on picture for pricing.