Craftsman Kits and castings in HO and O
Scale
C
O Scale Scenes - all
castings are sold unpainted

Return to casting selections
Here is something
new we will be creating. Scenes to add to your
layout with little work for you. They will give talking points to
your layout.
I always have these kind of scenes around my layouts. And they
always
give everyone something to talk about.
Give me some feedback as to
scenes you would like to see.




RRMS-O-09
- Well here is a
casting that will get you imagination going where to put it? Behind
the engine house, by the logging camp or by that old mine. This
will be a study in rust and how
weathered can I make this thing!! Mine is going in the bottom of
that canyon below my trestle
on my layout. The cab was cut down to show the wood falling apart. You may want to remove
the resin cab and make a real wood cab or
add more detail its up to you. The cost on this one
is not cheap since the mold will not last long
and will have to be replaced a lot. But this will
make a scene on your layout that will make viewers go
WOW!!! This casting is
5" by 3" and
2 3/4" high. All resin casting and comes unpainted.
Price is $25.00.

RRMS-O-01 - Here is our first scene
for O scale. This junk car is way past its
glory days. Its covered in junk and left to time
and the elements.
All resin castings.
Measures
6” by 3 1/2” and 2” high. .
Price is $10.00.


RRMS-O-02 -
Here is the next O Scale Scene. We have all seen this one before the
trash trucks use to wake you up once a week to dump the trash. You have a set of trash
cans with lids, two w/o a lid, two with the
lid half on and last but not least the spilt can.
You also would have a burn
barrel to burn your trash. Then check out the dog by the
spilt can. And the cat on the fence. The fence is a separate piece add it or
leave it off.
This is a two piece casting that measures 3 1/2" by 2". Just paint them up and they
are good to go.
Price is $7.50.


RRMS-O-03 -
If you are working on
a layout from the hills of Tennessee to the south
one of these would fit in your wooded area. Out of sight of the revenuers.
Check the detail
on this one, even the double barrel shotgun on the woodpile to
keep the revenuers away.
You have the jugs ready for the moonshine, a real
production line. So have some fun with
this one. Measures 3 1/2" by 2 1/2".
Price is $7.50



RRMS-O-04 -
This castings shows
the excitement I get of going to old junk yards. I could spend hours roaming
through the old cars. This shows a 1931 Ford that
could be out in the back of a abandoned house or in an alley.
This is a two piece casting with the headlights
cast separately. You can have some fun wit this one.
Measures 4 1/4"
by 3 1/2".
Price is $10.00


RRMS-O-05 - Well I cannot stop
making these, will be able to make a junk yard soon.
This shows a 1934 Ford
pickup that could be out in the back of a abandoned house or
in an alley. Check out the junk in
the pickup bed. You can have some fun with this one.
All resin casting. Measures
5 1/2” by 3 1/2” and 1 1/2” high.
Price is $10.00.
 
  
RRMS-O-07
- This one is really cool all that is missing is the bullet holes.
Just
check out the detail. This old model T has
seen better days. The seats rotted
years ago and just left the wood slats. The
inside of the cab even has dirt molded
in. Notice the weed growing in the cab
area. This casting is 4" by 3 1/2" and 1"
high. All resin casting and comes
unpainted.
Price is $10.00.




RRMS-O-08
- Here I go again
another of junk car. This was a Ford with a cloth top
insert that has long rotten away and the interior is gutted. Check
out the interior
shot.
The flathead engine is still around now ( must have been a blown motor or
that would be
gone by now) but that's about all. This casting is
5" by 3" and
1 1/2" high. All resin casting and comes unpainted.
Price is $10.00.
Return to casting selections
|